Follow our 7 easy step guide on how to make CBD oil at home with tools and resources that you can find at home or your nearby store. There are five critical steps to follow when learning how to make CBD isolate. Here's what it takes to make CBD isolate from the comfort of your home! CBD oil is expensive — so make it yourself! Making CBD oil is simpler than you might think. Learn the process from start to finish. Herbalist approved.
How to Make CBD Oil at Home in Just 7 Easy Steps
If you want to know how to make CBD oil at home, you’ll be pleased to know it’s a lot easier than you think. Keep in mind. It won’t be the same quality and retention of plant compounds as professionally done by companies such as ourselves.
Sure, you can get it from an outside vendor, yet there’s something about homemade cannabis edibles that makes things fun. We all know there are different ways vendors do it. CO2 extraction is all the rage, but you’ll need a lot of money to buy the equipment and pay the technicians who operate it for you.
You may also have heard of alcohol extraction. While accessible, this isn’t the easiest way to do it. The method we’ll cover today means you probably won’t even have to don your mask and visit the grocery store. Everything you need is either in your cupboard, pantry or fridge. If you’re still missing something, you won’t drop more than a couple of bucks.
So if you:
- a) Own a stove
- b) Are on a budget
- c) Have no clue what you’re doing
…this is your chance to quickly and easily learn how to make CBD oil at home.
How to Make CBD Oil: The Full DIY Guide
Before we get to cooking, it’s important we understand some fundamentals about CBD and CBD oil. We could go on forever with the fine details, but all you need to know right now are the types of CBD products and some easy science.
Types of CBD
If you visit a CBD company’s website, you’ll likely come across the terms “full-spectrum,” “broad-spectrum,” or “CBD isolate.”
These labels refer to cannabinoid and terpene content – if any. Let’s take a quick look at what each product means.
Full-spectrum CBD oil (a.k.a. “whole plant extract”) contains all other cannabinoids and terpenes found in the source plant. Different plants contain different chemical profiles, but full-spectrum products will always contain some traces of THC.
However, THC won’t cause intoxication in such low doses, and even helps the overall potency of your CBD mixture, thanks to the “entourage effect.” This synergistic relationship between cannabinoids and terpenes effectively allows them to complement or improve the potency and effects of your CBD oil.
One complaint people have, though, is that full-spectrum maintains a strong cannabis or “hempy” taste.
Keep in mind, the homemade CBD oil method we cover doesn’t allow you to filter out any compounds, keeping your CBD rich in cannabinoids and terpenes – in other words, full-spectrum.
CBD isolate is a product containing up to 99% CBD, with all other compounds completely gone. It’s colorless, odorless, and flavorless. Some vendors who want their edibles or oils to be unaffected by any plant aroma often choose CBD isolate.
Although it’s almost pure CBD, isolate lacks any of the beneficial cannabinoids and terpenes that work to trigger the entourage effect. Consequently, the therapeutic benefits of CBD isolate are limited compared to other forms.
Broad-spectrum CBD is the middle ground between full-spectrum and CBD isolate. It retains the same compounds as full-spectrum CBD, but with all traces of THC removed.
This is handy if you’re worried about triggering a drug test (which is possible) or if you’re sensitive to THC.
What is Decarboxylation?
Ever wonder why you have to light cannabis on fire or heat it in a vaporizer? The simple answer is “decarboxylation.” It’s an essential step when making your own CBD oil.
Cannabinoids originally sit in an inert acidic form. For example, CBD is originally CBDA (cannabidiolic acid) prior to decarbing. When heated to a certain temperature, the CBDA undergoes a chemical change that turns it into CBD.
The process of decarboxylation of the acidic form of CBD (CBDa) to Cannabidiol (CBD) with heat.
How to Make CBD Oil at Home
Now that we better understand CBD oil, it’s time to dive in on making CBD oil. The method we’ll describe today is the same one people use with any cannabis oil. It involves the use of dried flower from either an industrial hemp variety or “marijuana.”
Today, plenty of vendors offer industrial hemp dry herb in a variety of different strains and strengths – all with less than 0.3% THC. You can also get high CBD, lower THC flower from a dispensary or medical provider, depending on the laws in your state.
The following recipe will net you about 2 cups (500 ml) of CBD oil. The potency depends on how much CBD is in the dry herb, and the type/amount of carrier oil chosen. We recommend coconut oil because it does an excellent job retaining CBD and other cannabinoids.
The amount of dry herb and oil you use isn’t written in stone. The less oil you use, the more cannabinoids get packed into it. The level of CBD in your dry herb also affects potency.
But enough prepping – let’s make some CBD oil.
Things You’ll Need on Making CBD Oil
- 1/2 oz (14 g) industrial hemp flower or another cannabis flower (if legal)
- Baking sheet
- Aluminum foil
- 1 cup (250 ml) coconut oil
- Oven and stove
- Oven thermometer (optional)
- Meat thermometer
- Pot or saucepan
- Paper towel or coffee filter
Calculating Dosage When Making CBD Oil
Got all your ingredients? Great! Now it’s time to figure out how strong your oil will be. This requires some simple math.
Whether it’s industrial hemp or high-CBD “marijuana,” CBD levels vary from strain to strain. So let’s pretend your flower contains 20.0% CBD:
- Take 20.0 and move the decimal to the right, which shows your herb has 200 mg/g of CBD.
- Multiply that 200 by the number of grams you’re using – in this case, 14.
- We see that the total CBD in your batch will equal 2800 mg prior to decarboxylation.
- Now, we need to know the CBD per milliliter (ml), so divide 2800 by the 250 ml of coconut oil we’re using, which comes to 11.2 mg/ml of CBD oil.
If you find this dose is too little or too much, increase/decrease the amount of dry herb as needed. You can also add more oil to dilute the mixture.
To know how much CBD potency the hemp flower has, make sure you have the third-party lab report to get that number.
Here is a visual of a lab report on a cannabis hemp flower rich in CBD. As you can see, this hemp flower has a potency of 16% CBDA (cannabidiolic acid), which CBDA would then be converted to CBD after decarboxylation. Every 1,000mg of oil will contain roughly 160mg of CBD.
7 Steps on How to Make CBD Oil
Step 1: Preheat the Oven
Preheat your oven to 225 o F. This is a solid middle-ground. But remember that oven temperature isn’t likely to reflect the exact number shown on your stove.
It’s handy to have a simple oven thermometer if you want to keep a more precise tab on temperature. Undercooking won’t properly activate the cannabinoids while overcooking evaporates them away.
Step 2: Grind the Flower
Using your grinder , coarsely grind your cannabis flower . A simple metal hand grinder is a great choice, as these tend to give you the consistency you need.
Don’t over-grind it. If the pieces are too small, you’ll burn them before you even start making your own CBD oil.
Step 3: Prepare the Ground Cannabis
Line your baking sheet with aluminum foil . Evenly lay out the ground cannabis flower on your baking sheet. It’s important to keep it in an even, single layer. Otherwise, the flower won’t cook evenly.
Finally, cover the sheet with aluminum foil .
Step 4: Decarboxylate the Hemp Flower
If you have an oven thermometer inside the appliance, check to make sure you have the right temperature. If the difference is more than 20 o F in either direction, adjust the heat as needed.
Bake for 30 minutes, then remove and let the hemp cool for 45 minutes. Once cool, lift the layer of aluminum foil. If everything went well, the herb will have golden brown, toasted color.
Below is an image of grinded cannabis flower on the left prior to decarboxylation, and decarbed flower on the right.
The picture was taken from Madison Cole from Herbal Dispatch.
Step 5: Mix CBD with Coconut Oil to Make Tincture
Turn your pot or saucepan to low heat, and add the coconut oil. DO NOT allow it to simmer or sizzle.
Use the meat thermometer to check the oil temperature. It should hover at around 150 o F. If the mixture exceeds 200 0 F, you could cause some cannabinoids to evaporate during cooking.
You can use an overhead stirrer like this to set it on automatic, and it will mix the CBD extract with coconut oil to make CBD oil tinctures.
Step 6: Complete the Oil Infusion to make CBD Oil Tinctures
Cook the mixture for 30 minutes to 4 hours. The longer you cook, the more cannabinoids get infused into the oil, and the stronger your final product will be.
Step 7: Strain
Place a coffee filter or paper towel above a cup, small pot, or another container. Carefully and slowly pour the oil onto the filter or paper towel to separate and discard the plant matter.
Pro tip: Use two or three paper towels layered together, as a single one could rip while you pour the oil.
CBD Oil Uses
Congratulations on your first batch! Now that you can make your own CBD oil, it’s time to put it to good use. Although oil is typically associated with straight oral ingestion, there are other things you can do with it.
For instance, you can use it in edible recipes to make an endless range of tasty CBD-rich treats, or mix it with moisturizer to create a soothing topical. Some people add it to smoothies or use it as a salad dressing.
Ultimately, there’s almost no limit to what you can do with CBD oil.
How to Make CBD Oil: Final Thoughts and Tips
While making CBD oil, it’s important to consider safety. There are also some tips we want to address that’ll make your CBD cooking experience much better.
Safety when Making CBD Oil
Fortunately, you won’t be working with explosive substances like butane, nor will you need to worry about leaving solvent traces behind (alcohol method). Aside from “don’t burn yourself,” there’s really nothing else to worry about during the cooking process.
CBD itself, however, is another story. The cannabinoid is known to interact with a broad range of medications . Talk to your doctor before adding CBD to your health routine.
How to Make CBD Isolate: A Step by Step Guide
Whether you’re a new CBD user or known as a hemp advocate by all of your friends, you still might not understand precisely what CBD isolate is. Even seasoned CBD users struggle to comprehend the intricacies of CBD isolate such as how to make CBD isolate, and how it compares to other isolates.
So if you have any questions about CBD isolate, how to make CBD isolate, and any other hemp isolates, you’ve come to the right place. In less than five minutes, you’ll know everything you need to know about CBD isolate and how to make CBD isolate step by step.
CBD isolate is a hemp extract that is refined until cannabinoids like CBD are isolated as a 99%+. Other cannabinoids like CBN and CBG are available as pure isolates too!
What are Isolates?
While CBD oils contain a mixture of plant compounds and oils, isolates are the purest form of a cannabinoid. CBD, CBN, CBG, and other cannabinoids found in hemp can be isolated through an extraction process.
In other words, CBD isolate is a fancy way of saying pure CBD. Most cannabinoid isolates are 99+% pure. While some brands label their products as isolates, just like CBD product, not all isolates are created equal. The quality of isolates are in their purity, but we’ll get more into that later. Related: Does CBD isolate have THC?
How to Make CBD Isolate
Isolating one compound from a plant and extracting it purely is a complicated process that takes time. For the sake of clarity, we’ve boiled the process down to five critical steps to make a CBD isolate product.
1. Grow Premium Hemp: To extract any cannabinoid, including CBD, the hemp utilized must be of the highest quality. Premium hemp is organically grown and CBD-rich, which means there are more cannabinoids available for extraction.
This step is crucial, and you should always know what type of hemp your isolates are extracted from. The difference between premium hemp and industrial hemp is everything when it comes to achieving purified CBD. Although useful, industrial hemp isn’t grown with the same standards and lacks the quality necessary to make CBD isolate that is safe to consume.
- Crude Oil Extraction: In order to obtain this first extract, clean solvents such as ethanol or pressurized Co2 are utilized. The initial extraction results in an oil that contains all of the plant’s components. Crude hemp oil is full of beneficial plant compounds such as terpenes, flavonoids, and other minor cannabinoids.
2. Crude to Distillate: Crude hemp oil is further refined through a secondary extraction process that filters out most of the other plant materials resulting in a distillate containing 80-90% purified CBD. This method is sometimes referred to as winterization.
3. Distillate to Isolates: Finally, CBD distillate undergoes an isolation process, which results in pure CBD. This is known as Chromatography, a repeated process until the only thing that remains is pure CBD.
4. Testing Isolates: CBD isolate must be tested to ensure purity. Always check or ask for an up to date COA (lab test) when looking to buy CBD isolate online.
How to make CBD oil from Isolate
CBD is so popular as a pure isolate because isolates have a much broader range of use, including the ability to make CBD oil from isolate. Making your own CBD Oil is easier than you’d expect, and with a pure isolate, you are already halfway there.
Ingredients Required to Make Your Own CBD Oil
• Carrier Oil of Choice (Link to Top 7 carrier oil blog – this is one of our stronger posts in terms of rankings)
What You Need to Make Your Own CBD Oil
• Two pots (one large for holding water and one small to on top)
Once you have all of the necessary items, you’re ready to learn how to make CBD oil from isolate. Pure isolated CBD infuses seamlessly with most carrier oils creating a ready to use CBD tincture that works just as well as what you’ll find in the store. Although the carrier oil that you use is entirely up to you, we recommend coconut MCT oil or hemp seed oil because they work well with CBD product types.
To infuse your isolated CBD with a carrier oil, you’ll need to utilize the double boiling method. The double boiling method is a heat control technique used in cooking that allows you to blend ingredients without exposing them to high temperatures.
Double Boiling to Make CBD Oil from Isolate
After the water in the large pot begins to boil, add your carrier oil and CBD isolate to the smaller pot and stir the mixture until the pure isolate is no longer visible. Pour your CBD infused carrier oil into a container of your choice, and your homemade CBD oil is ready to use.
How to Make CBD Oil from Isolate: The Benefits
Once you learn how to make your own CBD oil, it is hard to go back to buying tinctures. With everything from ingredients to dosage in your control when you make CBD oil from pure CBD isolate, you create a personally tailored experience that is impossible to beat.
Do you want to know the best part of learning how to make your own CBD oil?
You can add other ingredients too! When it comes to isolates, the possibilities are truly limitless, because you don’t have to stop at just CBD. From carrier oils to other plants and even other cannabinoids! CBN and CBG are available as pure isolates too!
How to Make CBD Oil from Isolate: The Catch
Learning how to make your own CBD oil is great, but there is one catch to making CBD oil from isolate: it can’t be full spectrum.
While CBD is excellent as a pure isolate powder, the one downside is that it lacks some of the other beneficial compounds found in the hemp plant. Full spectrum CBD contains a variety of helpful cannabinoids, terpenes, and other organic elements. CBD isolate has perks of its own, but full spectrum CBD provides you with more of hemp’s benefits – the way nature intended.
CBD Isolate vs Full Spectrum CBD
The benefits of CBD are easily overlooked as soon as people begin to argue over which “type” of CBD is best. There are pros to all types of CBD, whether that be a CBD tincture or CBD gummy, but the kind that is best for you depends on what you need.
CBD, as a pure isolate powder, is an excellent option for anyone seeking a strictly CBD-only product. Full spectrum CBD products contain trace amounts of THC and other cannabinoids, so isolates provide a safe alternative for a CBD user.
The purity of CBD isolate offers you the flexibility to make other CBD products such as tinctures as topicals from scratch. CBD isolate blends easily with lotions and other skincare products, enhancing them through the power of hemp.
Pure isolates, especially CBD, are also great for infusing recipes with your favorite cannabinoid.
Full Spectrum CBD:
Full Spectrum CBD is also known as whole plant extract or whole hemp oil extract. Whole plant extracts, like the name suggests, is an extract containing all of the various beneficial components of a plant. From cannabinoids to terpenes and everything in between, whole plant extracts provide you with all of the compounds that make hemp so good for you.
Full spectrum CBD contains trace amounts of THC and other cannabinoids. While THC has gotten a bad rep over the years, studies show that it may work synergistically with other cannabinoids to enhance their effectiveness. This synergetic reaction is known as the entourage effect, which describes how all of a plant’s compounds work together to improve their therapeutic effects. Not all of these compounds are cannabinoids, in fact, hemp is notoriously terpene-rich.
Terpenes are the compounds that give a plant its scent and occasionally flavor. There are many different terpenes, and each possesses unique benefits of their own. Terpenes are known for their potency, so even small amounts have a lasting impact when pairing with a cannabinoid like CBD.
Full Spectrum CBD is ideal for those open to utilizing the benefits of the entire hemp plant. While CBD and other pure isolates are useful in certain situations, full spectrum CBD truly showcases the power of hemp.
Now That You Know How to Make CBD Isolate
You might be wondering how to use CBD isolate, where to buy CBD isolate online, and exactly how to make CBD oil from isolate. Luckily, we’ve got you covered.
Bloom is your resource for all pure isolates. With CBD, CBG, and CBN isolate available on our website, we make it easy to buy CBD isolate online.
Our blog is full of how to’s and complete guides. Check it out to learn everything from mastering the double boiling method to how to use CBD isolate.
DIY CBD Oil: How to Make Your Own CBD Oils at Home
CBD oil is expensive — so make it yourself! Making CBD oil is simpler than you might think. Learn the process from start to finish. Herbalist approved.
Making CBD oil doesn’t have to be a hard process. You can make your own oil from homegrown or store-bought hemp flowers. If you have access to CBD isolate, then making an oil-based preparation can be as simple as mixing the cannabinoid in a carrier oil.
The amount of effort involved depends on how you want to make the oil. Naturally, making an oil entirely from scratch will take much longer than a simple infusion made with CBD isolate.
In this article, we’ll teach you the methods used by both professionals and DIY cannabinoid enthusiasts.
Table of Contents
What Is CBD Oil?
CBD oil — AKA CBD tinctures — are oil-based infusions with either a CBD isolate, a full-spectrum hemp extract, or a combination of CBD extract with other herbs.
There are three main types of CBD oil-based on the ratio of CBD to other cannabinoids and terpenes in the final product. You can make all three at home yourself.
CBD isolate oils are made from just pure CBD isolate and carrier oil. This is the easiest type of CBD oil to make at home.
Broad-spectrum CBD oils contain a range of cannabinoids and terpenes aside from THC. You can make these oils at home, too but will need access to broad-spectrum extract or a few different types of cannabinoid isolates.
Full-spectrum CBD oils contain all the naturally occurring cannabinoids and terpenes from the hemp plant. You can make full-spectrum tinctures by infusing the raw hemp flower in oil or alcohol directly (the traditional method) or by ordering full-spectrum extracts and dissolving them into the oil.
How to Make Your Own CBD Oil
Making your own CBD oil can be a very fun process. The intensity and effort involved depend entirely on how independent you want to be in the production process.
You’ll be surprised at just how easy it is to make CBD oil at home. But you can make it as complicated as you want.
Making CBD oil ranges from simply mixing CBD isolate and MCT oil together — all the way to growing your own hemp and extracting the CBD with short-path distillation techniques.
Not everyone decides to go this route, though.
You can simply buy some CBD hemp flower or concentrated hemp extracts, some carrier oil, and a few empty dropper bottles, and you’re good to go.
Materials: What You’ll Need to Get Started
The ingredients and equipment that you’ll need will vary depending on how you plan to make your oil.
What you’ll absolutely need, regardless of what method you choose to pursue, is a source of CBD.
Unless marijuana is legal in your state, you’ll probably want to source your CBD from hemp flowers.
Here’s everything you’ll need to get started (base ingredients):
- Access to an oven, pressure cooker, or instant-pot — for decarboxylation
- A scale — to measure the dose of CBD
- A source of CBD — hemp flower, CBD isolate, or full-spectrum concentrates all work
- A double-boiler — this is as simple as placing a pyrex jar in a pot of water
- A cheesecloth or old T-shirt — for filtering the oil when you’re done
- A glass jar to store your oil — dropper bottles work the best for this
- A probe-style thermometer — to measure the temperature during decarboxylation
- A decarboxylator or precision cooker — for activating your cannabis
Let’s cover the entire process from start to finish. Some of the steps included are optional, so feel free to skip any of the steps listed as “optional.”
Step 1: Growing & Harvesting Hemp
*This step is optional. You can also just buy hemp flowers or CBD extracts to use instead.
If you want to go 100% DIY, you may want to grow your own hemp at home too.
Growing hemp is ridiculously easy — all it needs is water and lots of sunshine. They don’t call this stuff “weed” for no reason. Cannabis will grow in just about any condition and is highly resistant to over and underwatering.
For best results, make sure you’re using high-quality hemp seeds to start with and ensure your plants have plenty of sunlight.
If you do choose to grow your own hemp, though, make sure you read up on your local laws.
Different states may have different restrictions on the amount of hemp that you can grow. Also, remember that in the United States, hemp must contain less than 0.3% THC to be considered legal.
Harvest the hemp by cutting it down and drying it out. If you can move the buds to a sealed container (such as a mason jar) when they’re almost entirely dried out (a process called curing), your buds are going to have a much nicer flavor. This step is optional, however.
If you prefer not to grow your hemp yourself, you can choose to purchase CBD isolate powder, hemp concentrates, or raw hemp flower yourself instead.
Step 2: Decarboxylating Your Hemp Flower
*Skip this step if you’re using CBD isolate or pre-bought hemp extract.
Once you’ve grown & harvested your hemp buds or simply purchased some, you’ll want to activate it through the process of decarboxylation.
Most cannabinoids are minimally active when they haven’t been decarboxylated. This is why the majority of cannabis products either require you to heat them up (vape juices, joints, cigarettes, etc.) or have already been heated by the time you buy them (such as edibles).
If you’re going to be making cannabis oil, you don’t want to burn your buds. Instead, you should decarboxylate them with the use of indirect heat.
There are lots of ways to go about doing this, but the easiest, by far, is to use a pressure cooker or instant pot.
Load the hemp into sealed jars, place it in the cooker, and let it run for 30 minutes when it reaches temperature.
Using this method, you’ll be able to activate the hemp while minimizing the loss of terpenes and other beneficial cannabinoids in the process.
Avoid the oven method — which is the most common method recommended online. This will destroy all the terpenes in your hemp flower, damage much of the CBD, and make your tincture taste like leftover beef soup.
Step 3: Prepare Your Hemp or CBD Extracts
The next step is to decide how strong you want to make your tincture, and weigh out the equivalent dose.
Preparing Hemp Flower
If you’re using hemp, preparation involves weighing it out and grinding it up as much as possible. The amount you should use depends on how potent you want it to be and how much oil you intend to make.
You can try and calculate the amount of hemp flower you’ll need to get a specific dose, but it’s going to require a lot of calculating. Most herbalists don’t even attempt it — instead, they’ll just fill the jar with hemp, weigh it, and then pour enough oil to cover the entire mixture.
Once the tincture is done, you can measure the final volume and compare it to the initial weight of the hemp to determine the potency (ballpark).
I usually make my tinctures in a 500 mL mason jar, which will hold around 50 grams of hemp flower and 400 mL of oil or alcohol. That works out to a ratio of around 1:8.
Preparing CBD Isolates & Hemp Concentrates
If you plan to use concentrates, this step is super simple. You just need to measure out the amount of CBD you want in the final oil using a small scale.
You can also mix this together in the dropper bottle directly rather than having to use a mason jar.
If you’re using a standard 30 mL (1 oz) bottle, you can determine the amount of CBD you’ll need to add using this formula:
[Total Volume of the Bottle] X [The Desired Potency in mg/mL] = [The Total Amount of CBD Needed]
Let’s say we want an oil that delivers a dose of 20 mg of CBD per mg (which works out to one full dropper).
You’ll need to multiply 30 mL (the size of the bottle) by 20. This gives you a total of 600 mg of CBD needed to make this oil.
Weigh out the dose you want, and add it directly into the bottle.
Step 4: Adding Your Solvent (Oil or Alcohol)
The solvent is what’s going to extract the CBD from your hemp flower or dissolve your CBD concentrates.
Cannabinoids are only soluble in fats or alcohol, so you can use any vegetable oil, vegetable glycerine, or any alcohol with more than 40% ethanol (and no methanol) to make your tincture.
No matter what you choose, the method is the same:
- If using CBD concentrates, fill the bottle containing the concentrates up to the neck of the bottle (not all the way, or it will overflow)
- If using hemp flower, pour enough oil or alcohol to cover the hemp by about 1 cm (¼ inch)
Here’s a quick outline of some of the most popular carrier oils (and alcohol):
A) Olive Oil
Olive oil is a great option for people interested in making their own CBD tinctures. Olive oil is one of the most shelf-stable plant-based oils. It’s not as tolerant to heat as coconut oil, but it’s much easier to work with and remains liquid at room temperature.
Olive oil is also a rich source of vitamin E. Vitamin E helps to extend the duration of oil-based herbal products. Olive oil is also loaded with antioxidants and remains one of the most popular oils among medical herbalists due to its natural ability to draw out plant-based compounds.
Olive oil also has antifungal and antimicrobial properties. This helps to prevent the growth of mold as well as improve the efficacy of your CBD oil should you choose to use it on your skin.
B) Coconut Oil & MCT Oil
Coconut oil and MCT oil are among the best choices for making CBD oils.
MCT stands for medium-chain triglycerides. MCT oil is extracted from coconut oil. Both are saturated fats that are very healthy for the human body and fantastic for making herbal infusions like CBD oil.
MCT oil is much more expensive than regular coconut oil, however. However, some prefer to use MCT oil as it’s much better for making liquid CBD oil for oral usage. Coconut oil remains solid at room temperature and can thus be difficult to dose orally (although it remains fantastic for making CBD salves).
Coconut oil also has similar antifungal properties as olive oil.
C) Avocado Oil
Avocado oil is another polyunsaturated fat. It has a similar shelf life and temperature tolerance as olive oil. Its flavor is much less pronounced. This can be a plus for some, whereas others prefer the familiar flavor of olive oil.
You can always use alcohol instead of oil. It’s going to be the most efficient for extracting the active ingredients from hemp flower but makes the final product much harder to palette.
Step 5: Mix Thoroughly & Let Your Oil Sit
Once you’ve added your oil, close the lid and give everything a good shake.
CBD concentrates will diffuse into the oil within a few minutes, but it’s a good idea to let it sit overnight just to make sure.
When making tinctures from hemp flower, you’ll need to let the whole jar sit for at least a week — two weeks is even better. It takes time for the cannabinoids and terpenes to diffuse into your solvent. Give the jar a good shake every day to make sure it’s thoroughly extracted.
Alternatively, you can speed up the process by using a double boiler. Place the mason jar filled with hemp flower and carrier oil (alcohol won’t work for this method) and place it in a pot of water. Heat the water to just before boiling and stir continuously for about 30 minutes, then let the whole thing cool. Now you’re ready to strain.
Step 6: Strain The Hemp Flower Out of the Mixture
*Skip this step if you’re using CBD concentrates.
Once your tincture is ready, you’ll need to strain the hemp flower from the mixture. To do this, you’ll need to use a cheesecloth or an old T-shirt.
Be careful when straining! Make sure that you give the oil enough time to cool down before straining it. Again, a thermometer can be your friend here. Oil looks just about the same regardless of whether or not it’s burning hot.
You may also want to put in disposable gloves before straining your oil.
Line your fine-mesh sieve with your cheesecloth and set it over a bowl. Pour the CBD oil and buds into the sieve and let the bulk drip off. Then, grab the cheesecloth and squeeze as much of the excess as you can before tossing the leftovers into the compost.
Then, pour the oil out of the bowl and into a glass mason jar or whatever else you want to store it in.
Step 7: Adding Other Herbal Oils or Extracts
*This step is optional but recommended. You can do this whether you’re using hemp flowers or concentrates.
Combining herbs with similar benefits can produce synergistic effects and increase your overall level of relief.
Here are a few examples of other herbal oils that you may want to add to your CBD oil:
A) Calendula Oil
If you’re planning on using CBD oil on your skin, then you should consider including calendula oil. Calendula is renowned for its ability to fight inflammation and relieve pain when used topically.
Calendula also has an affinity for the skin. In addition to working as an analgesic, it helps to speed up the rate of wound healing.
Calendula oil can be made by infusing dried, finely chopped flowers into a carrier oil and setting them in a warm spot for a couple of weeks. Strain, then use alone or mix with CBD oil.
B) Passionflower Oil
Passionflower is a strong natural GABAergic. It can reduce anxiety and produce immense relaxation, if not full-blown sedation. It makes a great addition to CBD oil if you’re looking for something that can provide night-time relaxation or relief from anxiety.
C) St. John’s Wort
St. John’s Wort is generally regarded as the most potent natural antidepressant. It has been proven to be as effective as pharmaceutical SSRIs for fighting depression.
St John’s Wort can make a fantastic addition to CBD oil for many reasons. Not only does it fight anxiety and depression, but it can also help improve the health of the skin and reduce pain.
How to Store Your CBD Oil
We recommend using sealed glass mason jars for storing CBD. However, anything will work as long as it’s airtight. Store it in a cool, dark location or in the fridge.
Remember that storing most oils in the fridge may cause them to become solid if you’re using coconut oil as your base.
This greatly extends the shelf life but also requires you to think ahead before you can use them orally.
We personally prefer to keep the bulk of the oil in the fridge and keep smaller dropper bottles filled that can be left at room temperature and used regularly.
Oils left at room temperature can last for up to a year. Stored in the fridge, they can last closer to two years.
How to Use Your DIY CBD Oil
There are lots of different ways that you can use your homemade CBD oil.
Take It Orally
This might go without saying, but it bears repeating. CBD oil can be taken orally. The most common way to do so is by filling a dropper bottle with CBD and placing a few drops in your mouth.
CBD is more effective when taken sublingually and held under the tongue for about thirty seconds. This allows the supplement to absorb directly into your bloodstream rather than being processed by your stomach and liver.
The result of this is a much quicker onset of effects and higher potency. Sublingual usage will provide more value and allow you to enjoy your oil for longer.
Use it On Your Skin
You can use your CBD oil as the base for a variety of topical CBD goods. CBD salves, lotions, and creams are all fairly simple to make. Salves are the simplest: simply melt some beeswax, pour your CBD oil in, and allow it to harden.
If you’re going to be making a CBD salve, then you should absolutely include some of the other herbal oils mentioned above.
Calendula oil is particularly fantastic as an ingredient in a topical product. Arnica oil is another great option, as is a little touch of soothing lavender oil or St. John’s Wort oils.
Use It As A Massage Oil
You can use CBD oil directly on the skin as a massage oil or lubricant.
However, you’ll get more value if you first make it into a salve or lotion. You’ll also be able to enjoy more benefits if you infuse it with some of the other plant oils we’ve already discussed.
CBD is a powerful anti-inflammatory. This property makes it an excellent massage oil for people who have sore muscles and mild injuries.
Why Bother Making CBD Oil?
As the popularity of cannabis and hemp-derived medicine grows, so too does its availability.
Many people wonder why they would bother making their own tincture and oils if they’re already available at head shops throughout most of the country.
Here are a few reasons that you might be interested in making your own CBD oil and CBD-based products.
1. Controlling Dosage & Potency
Users who don’t make their own oils are at the mercy of whichever companies happen to be selling CBD in their local area.
Fortunately, there are tons of different CBD products and companies out there, so you’re almost guaranteed to find a product that matches your needs if you look hard enough. This might require that you look online.
However, if you’re looking for a specific benefit or outcome, or if you want to shop local, it can be difficult to determine from the available products which one will be the most effective.
Making your own oils is one of the best ways to ensure that you get the results that you desire. If you’re highly sensitive, for example, you can make a mild tincture that won’t cause you to experience drowsiness.
On the other hand, if you struggle with chronic pain or another serious condition, then the dose that you’ll need to find relief is probably higher than average. Making your own high-potency tincture can allow you to find relief with no more than a few drops instead of a few full droppers.
2. You Can Save Money
Another one of the best reasons to make your own CBD oil is to save money.
CBD oil is expensive, there’s no doubt about that. The price can vary, tending towards the cheaper side when the oils are made only with CBD isolate. However, the oils are always more expensive than CBD purchased on its own.
If you take the time to infuse your own oils, you can save quite a bit of money. Not only do you get better value when buying CBD isolate rather than a premade oil, but you’ve also probably already got some appropriate oils sitting around at home. Olive oil makes a great CBD infusion, as does avocado.
All of the other ingredients required to make a top-notch CBD oil are available online and at many headshops.
The simplest and cheapest option is to simply infuse CBD isolate with oil. If you prefer to make broad or full-spectrum extracts, though, you’re still in luck.
Some companies have begun selling terpene extracts. Terpenes are the volatile, aromatic compounds that give cannabis its familiar smell. The variance of these terpenes is one of the reasons that there are so many different types of marijuana.
To make a broad or full-spectrum extract, you need only add some terpenes to the oil. Then you’ve got a homemade CBD tincture that you probably paid only a fraction of the price for.
3. It’s An Entry Into Making Other CBD Products Too
Once you start making your own CBD oil, you’ve opened the door to a whole world of new products. CBD oil is the base for most of the topical CBD products that you’ve seen on the market: lotions, ointments, salves, and so on.
You can use CBD oil topically on its own. However, lotions and salves have a much longer shelf-life. Salves are generally made with beeswax, which solidifies the oil and protects it from degradation.
You can also use your CBD oil to make edibles. By replacing cooking oils with CBD oil in your favorite recipes, you can turn your snacks and meals into a healing, relaxing delight.
4. You Can Customize Your Oils
Full-spectrum CBD oil, and even isolated CBD oil, is pretty powerful stuff. However, any practicing herbalist will tell you that the best way to improve your health with natural supplementation is to combine several herbs or plants together.
Oil-based extractions are called infusions. Infusions made with several synergistic herbs will provide you with far more benefits than using a single herb on its own.
Synergistic herbs work together once they’re in the body to produce a variety of different benefits. For example, combining together several herbs that reduce anxiety can provide you with far more effective relief.
Even though some herbs produce the same effect, they can often do it in different ways. Combining them thus allows you to tackle your issues from all possible angles.
CBD, for example, reduces anxiety due to its interaction with the endocannabinoid system.
Passionflower and valerian root, however, provide relief through their interaction with the GABA system. Plus, even though they target the same system, they do it in slightly different ways.
Combining all of these herbs together creates a holistic solution that may provide you with much more relief than any herb would on its own. This can be done for numerous applications, not just anxiety relief.
For example, if you’re seeking pain relief you might combine your CBD oil with the infused oil of analgesic herbs such as St. John’s Wort or arnica. Both of these herbs are renowned for their ability to reduce pain. Depressed folks may wish to include oil infused with other natural antidepressants like rosemary or, again, St John’s Wort.
The possibilities really are endless. Just be cautious and educate yourself before combining different herbs together. St. John’s Wort, for example, is a powerful SSRI and its potency may be enhanced by CBD. This would mean that you should use a lower dose.
5. You Know Exactly What You’re Getting
There haven’t been many recorded cases of CBD oils being adulterated, but that doesn’t mean that this is impossible. Furthermore, the purity of CBD products is certainly a matter of concern.
When buying CBD, you should make sure only to purchase it from websites that provide a certificate of analysis: third-party lab tests verifying the contents and purity of the end product. When buying in person, you may have to rely on the word of the employees.
However, you can bypass the need for safety checks by making your own CBD oil. Even after looking at the results of a lab test, the only way for you to fully confirm an oil’s contents is to make it yourself.
You’ll know exactly how much CBD you included, any other ingredients, the purity and hygiene involved in the production procedure, and whether or not any impurities made it into the oil.
How Is Commercial CBD Oil Made?
Commercial-grade CBD oil can be made in a few different ways. Regardless of any specific method, the process of making an oil always requires the extraction and refinement of hemp components.
This extraction usually involves the use of a solvent (such as MCT oil or alcohol). These solvents help to separate the phytochemicals from the plant matter by dissolving them.
Once the plant matter is removed, what remains is a solution of cannabinoids, terpenes, and solvents. The solvent is then evaporated, leaving behind the active components.
That’s a very broad description, however. There are different extraction procedures. The specific production process, as well as the quality of the ingredients, will determine the quality of the end product.
Supercritical CO2 Extraction
Supercritical CO2 extraction is the most common form of CBD extraction used by commercial CBD manufacturers. This extraction involves the use of supercritical carbon dioxide and a closed-loop extractor. This is the same system that’s used for the large-scale production of essential oils.
First, the hemp is set in a chamber, The chamber is filled with CO2 and heavily pressurized. The intense pressure causes the CO2 to condense into liquid form. This allows it to absorb the various components of hemp.
The result of this procedure is a solution made of CO2, CBD, and other cannabinoids and terpenes. This solution is then pumped into a separate chamber where the CO2 is allowed to return to a gaseous state, thus leaving behind the cannabinoids.
To make CBD isolate, further refinement is required. Manufacturers generally make CBD isolate by using alcohol to separate the CBD from the other components.
CO2 extractions are the most popular because they have a great safety profile and produce very strong products.
CO2 extraction is straightforward and efficient. However, the process requires equipment that is expensive, and thus, CBD oils made with CO2 extractions are often more expensive.
CBD oils can also be made by using alcohol as a primary solvent. Ethanol and isopropyl alcohol are the two most common types used for this purpose. Marijuana enthusiasts may already be familiar with the use of isopropyl for making cannabis oil extracts.
Alcohol extractions are among the most simple. If you’re hoping to make your own CBD oil at home but don’t fancy yourself a chemist, an alcohol extraction might be the way to go. Some suggest that ethanol helps the compounds to remain stable during the extraction procedure.
One of the drawbacks of using an alcohol-based extraction is that the solvent can sometimes be tough to evaporate fully. The result of this would be residual alcohol in the end product.
Alcohol is a very strong solvent and may also draw the chlorophyll out from the hemp. Chlorophyll is quite bitter, and many people find it unpalatable, which would be a deterrent for oil made to be used orally.
Final Thoughts On DIY CBD Oil
CBD oil is surprisingly simple to make.
All you need is some CBD in the form of a concentrate or raw hemp flower and some oil.
Ambitious folks can take on the whole process from start to finish by growing and extracting CBD from their own hemp. More advanced methods can be used to concentrate your extract further, like short-path distillation or thin-film distillation — but this is extra.
If you want to take things further, you can use your CBD oil as a base for numerous other CBD products like salves and lotions. To really make the most out of the cannabinoid you should consider making a variety of products and using them all.