Marijuana Seed Germination Temperature Celsius

ILGM

Buy Cannabis Seeds Online

If you read our recommendations on how to choose the best moment to start your outdoor crop, you have probably waited for the good weather to settle in and for the be… Whatever method is used to germinate, specific important considerations must always be considered. Don't bury the seeds too deeply and do not oversaturate the medium with water. The germination of your cannabis seeds is the first step to getting your crop under way. Read more about the specific methods you can use.

How to germinate weed seeds?

You can germinate your cannabis seeds both indoors and outdoors, though our recommendation is that you do it indoors, as you will have more control over all the factors that can have a negative effect on the process. But if this is not, below we explain the best way to germinate seeds outdoors.

Our first recommendation, as we already said, would be to wait for the good weather to settle in. Having a high temperature (from 22 to 26°C) is an important factor for your seeds to decide to emerge into the world.

Step 1: protect your seedlings from climate factors and fauna, prevention is better than cure.

Outdoors we never know what dear mother nature has in store for us; in the same way that your seeds might enjoy a week of good weather and sun, there can also be thunderstorms and low temperatures on the very day they sprout. Not to mention the large variety of birds, snails and other fauna that delight in eating those tender and tasty marijuana seedlings. Bear in mind that during their first moments of life, your plants are defenceless against many dangers that threaten them; therefore, it is your job to take care of your little ones and keep them safe. How? It’s actually quite simple, you can buy mini-greenhouses for germinating or you can use a Tupperware and make holes in it for adequate ventilation, although we recommend the first option.

Ventilation is an important factor; don’t make the greenhouse airtight, open the trapdoors to allow adequate ventilation and as the covers are made of thin plastic, you can even make some extra holes if necessary.

Step 2: choose quality materials.

Today you can find high quality products on the market, specifically designed for germination and which, in addition, are not expensive. What do you need?

  • Germination greenhouse
  • Electric blanket: If you live in a very cold area, a good solution to stimulate germination is to place an electric blanket underneath the greenhouse, thus achieving an adequate temperature. It is important that the probe that measures the temperature calculates the temperature of the blanket, and not of the greenhouse, as otherwise you might heat the seeds excessively.
  • Jiffy 7: This product consists of of a compressed and dehydrated substrate pellet which, after leaving it in water for a few minutes, becomes a small sack of special substrate for germinating, and is also biodegradable. This is the star product that will optimise your germination process due to the following reasons:

– On the one hand it has the ideal structure, that is, the amount of air and water in the substrate is adequate for germination.

– It is sterilised, meaning that we prevent the appearance of fungi (powdery mildew, botrytis, etc)

– It has all the elements necessary to nourish your seed/seedling during the first week; the ideal amount of nitrogen, phosphorus, potassium, calcium and magnesium. Phosphorus and calcium are particularly important for the correct development of roots.

– It has a neutral pH, which is the most adequate and makes it the perfect medium for germination; during one week you just have to add water.

– Jiffy 7 is expressly designed for the mega-industrial production of seedlings and does not require fertilisation.

– Another advantage is the specific temperature: water has a low specific temperature. This means that if we place a glassful of water in a room at 25°, it will be very hard for the water to reach that temperature. Therefore, if we place the cannabis seeds in a very watery medium (a glass or between paper towels) the temperature will be lower, while in a Jiffy, as it is more exposed to the air, the temperature will be higher and the process, faster.

However, there are people who germinate marijuana seeds in paper towels. Why don’t we recommend them? Well, although this method may be effective, it is not the most adequate and has some disadvantages. To start with, the seedlings do not receive the necessary light, as the paper towel that covers the top prevents the sun’s rays from penetrating. In turn, in the Jiffy they do receive light, and therefore photosynthesis will start earlier. Another advantage is that as soon as the root emerges in the Jiffy, it starts to turn downwards and to absorb nutrients: on the one hand we accelerate the process and on the other, when we replant the Jiffy 7 with the seedling there is no transplant shock.

See also  Mac 1 Weed Strain Seeds

Step 3: follow the method.

  • Put the Jiffys in lukewarmwater.
  • Once the Jiffys have expanded, make sure that they are thoroughly wet (don’t squeeze them, just remove the excess liquid if they are dripping). Monitor the pH (between 6 and 7) and the EC (less than 0.5 ms) of the water.
  • Insert the seed in the central hole of the Jiffy, not too deep (approximately 5 mm) with the tip pointing upwards. The marijuana plant must not be sown too deep because otherwise the root has to travel too far: it always emerges through the pointy part of the seed, turns 180°, penetrates into the soil, and once it is secure, it raises its “head” from where the cotyledons will grow.
  • Place the Jiffys in the greenhouse as well as a thermo-hygrometer to monitor the temperature and humidity.
  • Temperature control: it must not fall below 20 degrees nor exceed 30. If you put the greenhouse in the sun, it can get very hot; you must constantly monitor the temperature. If it exceeds 25 degrees, we recommend that you lift up the top cover to ventilate it. Another important factor you have to check is humidity. If it is very sunny, the Jiffys will dry up and it is important that they are always humid. You must therefore add water when necessary, though not in excess. They should only be soaking wet during the first two days. After one week we should already have marijuana seedlings; with their two cotyledons (the first two round -shaped leaves), before the first two real leaves sprout (the serrated leaves), transplant them. If they are autoflowering seeds, we recommend that you transplant them to the definitive flower pot, though if they are feminised seeds you can transplant them to a smaller pot and then, when the plants are larger, you can move them to the definitive pot.

For indoors: The same but under a grow light, fluorescent or LED. If you have the option of germinating your cannabis seeds inside your home, ideally the light intensity will be high; the less intense the light, the more the seedlings will stretch in search of light and become spindly. If you use a 400 W light ideally it should be 40-45 cm away.

Now that you know how to take your first steps, you’re ready to start this season’s crop. Have a good harvest!

Author

Kushka Barcelona-born journalist and grower with a curious spirit. I used to spend my life travelling, writing and working with cannabis clubs until Professor OG called me. My two passions, the plant and the writing, have followed the same path ever since. I absolutely love tricky subjects, those that oblige me to spend days buried in books, investigating and driving the entire technical team crazy. There’s no way I can write a story without going into the issue in depth. I enjoy challenges, but even more sharing them with you on our blog. You can find on instagram at @_kushka.

Categories

  • Cannabis activism
  • Hot news
  • Cannabis Genetics
  • Cannabis Growing
  • Growing techniques
  • Trimming techniques
  • Biological prevention
  • Organic Growing
  • Fungi
  • Indoor Growing
  • Outdoor Growing
  • Harvest
  • Grow Reports
  • Nutrients and fertilizers
  • Plagues
  • Medical Cannabis
  • Weed Recipes
  • CBD
  • Risk reduction

Most popular posts

Can marijuana lead to addiction?

Differences between cannabis and hemp

Cannabis types and varieties

Don’t miss any posts!

Subscribe to our newsletter and stay up-to-date with the latests cannabis news.

The Most Common Ways To Germinate Cannabis Seeds

News Americas, NEW YORK, NY, Weds. May 31, 2022: Marijuana seed germination is a simple process, but it is critical for starting the crop in the best possible way.

There are several methods for germinating cannabis seeds. You can try to germinate weed seeds in a glass of water or use any other method shared below. All of them are correct, but some are preferable to others.

We must always germinate the seeds before growing them indoors, outdoors, in hydroponic or organic crops. To accomplish this, you must follow a series of simple steps ideal for effective and rapid germination.

This post will discuss the various methods for germinating marijuana seeds. We will also provide you with a summary of the benefits and drawbacks of each technique. Let’s get started!

How to germinate cannabis seeds

The first step is to summarize the conditions that must be met for adequate germination. The first thing we must control is humidity or water.

We can use tap water without issue unless it has a very high EC (from 1).

In the meantime, a small amount of distilled or reverse osmosis water will suffice.

Many growers typically add a few drops of hydrogen peroxide (hydrogen peroxide) to the water. As a result, the water contains more oxygen. In addition, hydrogen peroxide’s antifungal properties are used. This reduces the likelihood of fungi appearing.

The pH level of the water must be close to 6. The temperature should be around 22oC, and complexes or root stimulators can be added if desired.

See also  How To Get Seeds From Marijuana

Best seed germination substrates

  • On the one hand, there’s Jiffy (pressed peat or coconut tablets)
  • Rock wool cubes
  • Paper napkins.
  • Tacos with Root Riot Spread

Once we have the water and the medium for germinating, we must determine the best conditions for growing.

It is recommended that they be kept in a dark and humid environment, but they must be well ventilated. It would help if you also held it at 25 degrees Celsius.

There are some small greenhouses on the market that simulate ideal seed-germination conditions.

Suppose we use kitchen paper as a germination medium. We must maintain these conditions until the seeds germinate, that is, until the radicle appears, which will later become the plant’s main root.

The seeds are planted when this article is about 1 cm long, and after a few days, a tiny seedling can be seen growing.

Next, we’ll go over the various methods for germinating seeds:

Substrates and media for cannabis seed germination

Now we’ll go over the most common methods for germinating seeds. Keep in mind that the media must be wet with the previously mentioned water.

1. Peat jiffy

Jiffy is pressed, and dry peat plugs. It would help if you soaked them for some time before transforming them into a cloth bag of the substrate.

Usually, seeds are sown directly in the jiffy without first germinating. In other words, the seedlings germinate now in the jiffies where they will grow. The plant is then transplanted into a pot to begin the growth phase.

Jiffy comes in various sizes and materials, such as peat or coconut fiber. Because this substrate retains a good amount of water, they do not need to be hydrated during the germination stage.

2. Rock wool

Another germination method is Rockwool cubes or plugs, which are widely used, especially when using hydroponic or aeroponic methods. This method cannot contaminate the system with peat or coco residues, as occurs when cultivating with a jiffy.

The seeds germinate quickly in this substrate, but You must control the humidity level of the rock wool because it dehydrates, unlike jiffy, which retains moisture. As a result, a daily check should be performed to ensure that the rock wool is moistened.

3. Root Riot Spread Tacos

Root Riot’s propagation plugs are made of a sponge-like material composed of composted organic materials. Its porous structure aids in maintaining the ideal air/water ratio for root development.

They contribute to the proper balance of water, oxygen, and micronutrients. This method of germination produces excellent results. It is used in the same way that rock wool blocks are.

4. Kitchen paper

Cotton is commonly used in place of kitchen paper. It consists of moistening the folded kitchen paper in a container. It is one of the most common methods for germinating seeds.

It is one of the most common ways to germinate seeds of any plant, and it is sometimes replaced by cotton. It entails moistening the folded kitchen paper in a container (for example, a plate). The more paper you add, the more moisture is retained, and the less the paper must hydrate during the process.

When the seeds are moist, they are placed on top and covered with a thin layer of paper (this step is usually forgotten). The plate is then covered with another of the exact dimensions, with a small gap between them to allow the seeds to “breathe.” As with rock wool, we will keep the medium – in this case, the paper – moist at all times.

5. Others

If the crop is to be grown outside, another option is to plant the seed directly in a pot or on the ground. This is not usually recommended because the seed may remain deeper than it should. We also push the seed deeper if we water after planting.

As a result, the soil must be watered before sowing the seed. It is also recommended to soak the seeds for one day before planting to promote seed germination.

Germinate marijuana seeds step by step

Marijuana seeds can be germinated using:

Germinate seeds in a jiffy (small bags of peat)

The jiffy must first be soaked in water for 15 minutes. When they begin to swell, They are drained slightly, and a 1cm deep hole is made. The seed is placed in this hole, with its crown facing upwards.

You can buy small plastic greenhouses with holes to allow them to breathe. The hole is filled with unpressed peat, and the jiffy is kept dry, warm, and ventilated. However, keep them away from drafts. Usually, seedlings emerge after three days. The plants took three days to hatch using this method.

Germinate marijuana seeds in Rockwool

To begin germinating seeds, we must first hydrate the Rockwool like we do jiffy. The excess water is then drained, and the seed is planted in the same manner as in the jiffy, one centimeter deep with the crown upwards and covered with rock wool. Because rock wool can dry out, we must keep it moistened daily if required. Small greenhouses are highly recommended because they keep the Rockwool moist and prevent it from drying out.

See also  Marijuana Seeds Not Sprouting

When the seedling emerges, it will be transplanted to our choice’s substrate or hydroponic system. Germination in Rockwool takes about three days on average.

Germinate seeds in Root Riot

Root riot’s seed germination procedure is very similar to Rockwool. Seedlings are born after four days using this method.

Germinate seeds on kitchen paper

To germinate marijuana seeds using this method, we take a couple of kitchen papers and fold them several times.

We moisten the paper in a deep plate or similar container with water. The seeds are then placed on top and covered with a layer of paper.

We use another deep plate with a small hole for air to enter as a lid.

It is frequently used in conjunction with one of the preceding methods. When the seed radicle appears, it is placed instantly, a cube of rock wool or a propagation block. After a few days, the seedling emerges.

Conclusion

Whatever method is used to germinate, specific important considerations must always be considered.

Germination Cannabis Seeds

Germinating your cannabis seeds is the first step to getting your crop under way. It is the process in which life within the seed is stimulated, turning it from a seed into a sprout.

There are three main stimuli that trigger germination; Water, air and warmth. All three must be present for the cannabis seed to successfully grow. The first is water; the seed goes through a process called “imbibing”, this is where the seed soaks up water around it, eventually causing the seeds shell to split as the embryo inside expands. The second factor which is required to trigger germination is air. This will ensure that the embryo that it has what it requires to perform photosynthesis and transpiration. Finally the cannabis seed needs a degree of warmth to trigger growth. The embryo contained within the seed has a small store of food to get itself going; it just needs these indicators to give it the go-ahead.

As your cannabis seeds take their first steps into life they will develop a tap root, which bursts through the shell of the seed. As it continues to grow it will produce 2 small embryonic leaves known as the cotyledons; these will push off the remainder of the seed shell – do not attempt to remove it yourself, you are likely to do more damage than good. When these leaves appear it is very important to start providing the seedling as much light as possible, allowing it to start its process of photosynthesis, which produces the fuel for its future growth.

There are a few methods by which you can germinate you cannabis seeds, some of which are more reliable than others. It is generally recommended as a novice cultivator, that if you have 10 seeds start by germinating 5, followed by the other 5 the following week. This will ensure that if you spoil your first batch due to poor technique, you will still have some seeds left to try again. If you are confident in your skills, and you have done this a few times, then there is no reason not to do them all at once.

Generally speaking, cannabis seeds germinate best in temperatures of 69-80 degrees Fahrenheit (21-27 degrees Celsius), and will take around 2-7 days to germinate. Although many believe otherwise, it is fine to have your seeds germinate in daylight.

Extra Tips:

If you buy low quality/immature seeds then you are not likely to get very good success rates, no matter how experienced you are. Indicators of a bad seed can be a pale whiteness in color, but this can also be the appearance of some specific strains – so do some research or contact your seed bank if they have sent you white seeds you were not expecting.

Other factors that can cause cannabis seed germination to fail are incorrect pH levels, seed exposure/drying out, the incorrect depth, over feeding, physical damage or bad soil. Take care where you store you germinating seeds as well; for example, a cold draft could end up damaging your seeds, causing the growth to be stunted.

If you are growing in soil then refrain from the urge to uncover your seeds to see how they are doing – no matter how long you think they are taking. It will do more harm than good, as you can damage young roots.

Finally, some strains of cannabis can grow with fairly weak stems. If you notice your seedlings leaning to the side, prop them up with a small stick until they are stronger. Never use a stick from the outside; they can bring in unwanted, negative variables such as pests.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.